Hi Scotty, I have a 2016 Volvo V40 D2 Cross Country diesel 6 speed automatic here in England with 19,000 miles on it, It had 8,000 miles when I bought it, The transmission is not changing gear…

Caponord_1000

Hi Scotty,
I have a 2016 Volvo V40 D2 Cross Country diesel 6 speed automatic here in England with 19,000 miles on it, It had 8,000 miles when I bought it,
The transmission is not changing gear properly and the car has lost some power, (no torque), it’s like the gearbox is unsure what to do, I bought a Bluetooth scan tool for my phone and got a long list of codes, The Volvo dealer states that there are no codes showing on the car,
There is no check engine light showing on the dash,
My question is,
Is my scan tool doing a deeper scan than the Volvo dealer,
Here is a list of the codes from my scan tool,
Thanks Scotty,
P0218(68) = Transmission over temperature condition.
P0561(00)=System voltage-unstable.
P0606(68)=Engine control module (ECM)/Powertrain control module (PCM)-processor fault. P0607(04) and (42) and (45) and (48) and (94) =Engine control module (ECM)-performance problem. P060A(68)= Engine control module (ECM), monitoring processor performance problem. P060C(68)=Engine control module (ECM), main processor - performance problem.
P0729(68)= Gear 6 - incorrect ratio.
P0731(00) and (71) and (79) = Gear 1 - incorrect ratio.
P0734(68) = Gear 4 - incorrect ratio.
P0735(68) = Gear 5 - incorrect ratio.
P073F(68) = Transmission system unable to engage gear 1.
P0741(68) = Torque converter clutch (TCC) solenoid - performance or stuck off.
P0744(68) = Torque converter clutch (TCC) solenoid - circuit intermittent.
P074C(68) = Transmission system - unable to engage gear 4.
P074D(68) = Transmission system - unable to engage gear 5.
P074E(68) = Transmission system - unable to engage gear 6.
P0780(00) = Gear selection - shift malfunction.
P0797(00) = Transmission fluid pressure (TFT) solenoid C - stuck on.
P0893(68) = Multiple gears engaged.
P0894(68) = Transmission component slipping.
P0B0D(00) and (11) = Auxiliary transmission fluid pump control module - malfunction.
P1738(68) = Shift time error.
P1783(68) = TransmissionOvertemperature Condition.
P2711(68) = Unexpected mechanical gear disengagement.
P2715(00) = Transmission fluid pressure (TFP) solenoid D - solenoid stuck on.
P2733(00) = Transmission fluid pressure (TFT) solenoid F - solenoid stuck on.
P2783(68) = Torque converter - temperature too high.
P2787(68) = Clutch - temperature too high.
C0077(68) = Low tyre pressure.
U3000(49) and (45) = Control module.
B108E(07) = Faulty Front Display Interface Module (FDIM)
U0159(00) = Data bus, parking I’d control module A - no communication.
P00BD(00) = Mass air flow (MAF) sensor A - circuit range/performance.
P00BC(00) = Mass air flow (MAF) sensor A - circuit range/performance.
P00BF(00) = Mass air flow (MAF) sensor B - circuit range/performance.
P0106(02) and (00) = Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor - range/performance problem.
P2227(00) = Barometric pressure (BARO) sensor - range/performance problem.
P0236(00) = Turbocharger (TC) boost pressure sensor A/supercharger (SC) boost pressure sensor A - range/performance problem.
P00CF(00) = Barometric pressure (BARO) sensor/turbocharger (TC)/supercharger (SC) boost pressure sensor A - correlation.
P023D(00) = Manifold absolute pressure (MAP) sensor/turbocharger (TC)/ supercharger (SC) boost pressure sensor A - correlation.
P2263(00) = Turbocharger (TC) boost pressure/supercharger (SC) boost pressure - performance problem.
P2262(00) = Turbocharger (TC) boost pressure not detected.
P02CA(00) = Turbocharger (TC)/ supercharger (SC) B - overboost condition.
P02CB(00) = Turbocharger (TC)/ supercharger (SC) B - underboost condition.
P0234(00) = Turbocharger (TC), engine boost condition - limit exceeded.