I have a 2009 Honda Accord Sedan and I have a p0341, auto zone gave me a print out and I researched the issue and the top issue is I needed to replace my camshaft position sensor. I replaced the part and deleted all the engine codes and drove around hoping the problem was fixed but within 5 mins the engine light came on and the p0341 code returned. I purchased a crankshaft position sensor and I will put it on when I get it but if this does not fix the issue then what other problems could cause this p0341 on a 2009 Honda Accord Sedan and how would I fix it.

ok there are two engines that year, a 6 and a 4 cylinder. 4s have a timing chain, which can stretch and do that. V6s have a timing belt that more often stretches and trips the code if sensor and wiring are intact

I think I fixed it. I changed the camshaft position sensor and that did not fix the issue but I just replaced the crankshaft position sensor, deleted the engine error codes and drove around for over 30 minutes and the engine light has not come back on. The car is not idling roughly, it's not struggling to get power. It is shifting properly as well. Thank you. I will still change the oil, the filter and the oil pressure switch